Model tab settings – Maple Systems 5000HD Series User Manual
Page 114
108
EZwarePlus Programming Manual
1010-1015, Rev. 03
Model tab settings:
1. HMI model: Select the HMI model that you are programming.
2. HMI station no.: When multiple HMIs are used, this selects the unique network address of the HMI.
See Controller Information Sheet for more information.
3. Port No: Assign a TCP/IP port so that another HMI can access this port. For more information, select
Help > Help Topics > How Do I…Setup TCP Port Forwarding With the HMI.
4. Support CloudHMI communications protocol: reserved for future use.
5. Clock Source: Select internal HMI RTC or External Device.
6. Printer Type: Select type of printer to be connected locally to the HMIs serial port or USB port.
7. Scroll bar: select the size and appearance of the scoll bar(s) on certain display objects. The scroll bars
appear automatically as needed.