Auto logout, Additional security features, Project password (mtp file) – Maple Systems 5000HD Series User Manual
Page 203: Project protection
EZwarePlus Programming Manual
197
1010-1015, Rev. 03
Auto logout
There is an Auto logout feature in the System Parameters on the System Setting tab (Edit > System Parameters >
System Setting).
When this feature is enabled, you can select the number of minutes of inactivity before the HMI will automatically
logout the user. This avoids a situation where a user logs in and forgets to log out before leaving the HMI (use LB9050
to manually logout a user).
Additional Security Features
Project Password (MTP file)
Enable the Project Password in the System Parameter settings (Edit > System Parameters > Security tab). This secures
a project and prevents it from being modified without the proper password. When the Project Password is enabled,
you must enter the correct password in order to open the project in EZwarePlus.