Maple Systems 5000HD Series - Manual (Page 177)

EZwarePlus Programming Manual 171
1010-1015, Rev. 03
8. Click on the Trend tab to display the Trend dialog box.
9. Select the Frame color and the Background color for the trend from the drop down menus.
10. Check the Show scroll controls checkbox to enable the left and right scroll controls on the Trend Display.
11. Check the Transparent checkbox to allow the Trend Display to be transparent. This allows you to overlay two
Trend Displays, one on top of the other, and see the channels in both displays. By stacking Trend Displays,
you can show data from non-consecutive registers on one display.
Note: The scroll controls are not linked when stacking Trend Displays.
12. Check the Enable checkbox in the Grid section if you would like the trend to display a grid. The Horiz.:
division(s) determines the number of divisions from bottom to top. The Verti. interval: second(s)
determines the number of divisions from left to right. For example, if the X-axis is configured for time = 100
seconds, setting the Verti. interval to 10 seconds creates 10 divisions from left to right on the Trend Display.
13. Check the Time scale Enable checkbox (only visible when the X-axis time range is set to Time) to display a
time stamp at each division along the X-axis. Select the Format (HH:MM or HH:MM:SS) and the Font, Size,
and Color.
14. Check the Time and Date checkboxes in the Time/Date section to display the current time and date in the
upper-left corner of the Trend Display, and then select the format in which you'd like the time and date
displayed.
15. Click on the Channel tab to display the Channel dialog box.