Maple Systems 5000HD Series - Manual (Page 24)

18 EZwarePlus Programming Manual
1010-1015, Rev. 03
Changing or Restoring the HMI Settings by USB or SD
There may be times when it is necessary to change or update the settings in an HMI, when the IP address or password
of the HMI are unknown. EZwarePlus provides a tool to create a system settings file, and transfer that file to the HMI.
The following settings can be changed with the System Setting Editor:
Password Local, Upload, Download, Upload History
General HMI Name, Backlight Brightness, Time Offset (Time Zone Adjustment),
Portrait Mode (0, 90, 180, 270 degree rotation)
Network Use DHCP, IP Address, Subnet Mask, Gateway, DNS
Clear History Recipe, Data Log, Event Log, Operation Log
VNC Server Enable, Stop VNC, Stop VNC, Start VNC Single Connection, Start VNC Multiple Connection
Download Popup Download Window, Restart After Download/Upload
To open the System Settings Editor, use the Tools menu in EZwarePlus:
Once all the settings are made, click the Export button to save the data to a file.