EVS XT3 Version 11.00 Configuration Manual - Manual (Page 93)

3.3.3. Supported Configurations
General Information on Supported Configurations
Overview on Supported Configuration Types
An XT3 server, equipped with V3X boards, supports the following configurations types:
• standard SD/HD configurations
• standard SD/HD 2R/CM
1
configurations (using secondary links for independent
recorders)
• SLSM SD/HD configurations
• SLSM SD/HD 2R/CM configurations
• 3D/1080p configurations
• SLSM 3D/1080p configurations
Note
Mix on one channel
2
is available on all SD/HD configurations.
Number of Recorder and Player Channels
The XT3 server can work in two modes:
• LSM mode, when it is controlled by the Remote Panel
• Spotbox mode, when it is controlled by industry-standard protocols such as Sony
BVW75, VDCP, Odetics, DD35, EVS’ AVSP, IPDP, EditRec or LinX API.
1
Abbreviation standing for ‘2 record channels par codec module’. This
feature allows using the secondary link of the codec module of a
recorder channel as an independent recorder channel.
2
Feature that allows using the secondary link of the codec module of a
player channel on the V3X board (J3) as the preview channel to provide
the PGM/PRV mode with a single codec module.
87 3. Multicam Configuration
EVS Broadcast Equipment S.A. - April 2012 Issue 11.00.C