EVS XT3 Version 11.00 Configuration Manual - Manual (Page 132)

The audio gain can be adjusted by steps of 0.75dB, 3dB or 6dB, in the range from
-77.25dB to +23.25dB of the current audio level.
The following screenshot shows the display of mute and audio gain settings:
Commands
The following table shows the various commands available to adjust the audio gain, and
mute an audio channel.
One of the following command can be applied on an individual channel when it is selected
and when the audio gain display is on.
Command description Command key
Hiding and Showing the audio gain display CTRL+G
Muting the selected audio channel CTRL+M
Un-muting the selected audio channel CTRL+U
Increasing by 0.75dB the audio level of the selected audio
channel SPACEBAR
Lowering by 0.75dB the audio level of the selected audio
channel SHIFT + SPACEBAR
Increasing by 3dB the audio level of the selected audio
channel CTRL+ARROW RIGHT
Lowering by 3dB the audio level of the selected audio
channel CTRL+ARROW LEFT
Increasing by 6dB the audio level of the selected audio
channel CTRL+ARROW UP
Lowering by 6dB the audio level of the selected audio
channel CTRL+ARROW DOWN
XT3 Server - Version 11.00 - Configuration Manual
3. Multicam Configuration 126