EVS XT3 Version 11.00 Configuration Manual - Manual (Page 186)

3.8.2. OSD Settings
Introduction
The OSD settings allow users to specify which and how the information will be displayed
on the OSD.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Operation tab, in the basic display mode on
page 1 on the server- and web-based interfaces.
• in the Operational menu of the Remote Control Panel (1.1).
The following screenshot presents page 1 of the Network tab in the server-based
application, where the OSD settings are available, and highlights the OSD settings area:
Cue number on OSD
Description Enables / disables the display of the cue point number on the
OSD of the output monitors when a cue point is recalled inside
a record train.
Values Yes (default) / No
Keyword info
Description Shows / hides the defined keywords and ranking on the OSD
of the output monitors when the clip is loaded on its Short IN
point.
As soon as the operator starts jogging into the clip or initiates a
playback, this information is removed from the OSD so that
the video content is clearly visible.
Values Yes / No (default)
XT3 Server - Version 11.00 - Configuration Manual
3. Multicam Configuration 180