EVS XT3 Version 11.00 Configuration Manual - Manual (Page 212)

Second lever range
Context The lever can be used in normal mode to play back clips at
slow motion speed from 0 to 100%. A secondary range is
available to playback material at other speed ranges.
To gain access to the secondary speed from the remote
controller, press SHIFT + LEVER/TAKE.
The second lever range is also available when editing the
speed of playlist clips.
Description Specifies the secondary speed range on the LSM Remote
Panel.
Values The following values are possible:
• -100% → +100%
• 0 → +200%
• -200% → +200%
• 0 → +400%
• -400% → +400%
Default value -100% → +100%
Recall clip toggle
Description Enables/disables the selection of the camera of a clip through
the Function keys: Pressing several times the F_ key browses
to CAM A, CAM B, CAM C, CAM D, CAM E and CAM F.
Possible values: Enable (default) / Disable
This option
Values Yes / No
Default value Yes
Record key
Description Changes the function of the RECORD key on the LSM
Remote Panel, as described below.
Values The following values are possible:
• Start REC+Live:
Pressing the RECORD key starts the record process and
switches to LIVE mode.
• Live:
Pressing the RECORD key only switches to last recorded
picture, but the record is not restarted if it has been
previously stopped by the operator.
Default value Start REC+Live
XT3 Server - Version 11.00 - Configuration Manual
3. Multicam Configuration 206