EVS XT3 Version 11.00 Configuration Manual - Manual (Page 25)

2.2.7. Copying, Pasting and Deleting Configuration
Lines
How to Copy/Paste Configuration Lines
In the Server-Based Application
Warning
Note that copying a line onto another position will erase the configuration on
the selected position.
To copy and paste a configuration line in the server-based application, proceed as follows:
1. Press the UP ARROW or DOWN ARROW key to respectively move up and down in
the list of configuration lines until the requested line is highlighted.
2. Press CTRL+C to copy the line to the clipboard.
3. With the UP ARROW and DOWN ARROW keys, move to the position where you
want to copy the line.
4. Press CTRL + V to paste the line to the selected position.
5. Press ENTER to confirm that you agree to replace the former configuration line by the
one copied on the selected position.
In the Web-Based Interface
The feature to copy and paste configuration lines is not available as such in the web-
based interface.
You can however use the import and export feature to change the position of lines in the
list of configuration lines.
How to Delete Configuration Lines
Warning
When you delete a configuration line, the line will automatically be deleted,
without prior warning message.
In the Server-Based Application
To delete a configuration line in the server-based application, proceed as follows:
1. Press the UP ARROW or DOWN ARROW key to respectively move up and down in
the list of configuration lines until the requested line is highlighted.
2. Press CTRL+D to delete the line.
The line is directly deleted.
19 2. Multicam Setup
EVS Broadcast Equipment S.A. - April 2012 Issue 11.00.C