EVS XT3 Version 11.00 Configuration Manual - Manual (Page 165)

Channel Settings for Edit Rec
Introduction
The Channel settings allow specifying the settings related to the channel behavior in
stop mode.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Protocol tab, on page 2 for Edit Rec 1 and on
page 3 for Edit Rec 2, in the basic and advanced display mode in the server- and web-
based interfaces.
• in the Technical menu of the Remote Control Panel, pages T5.4 for Edit Rec 1 and on
page T5.7 for Edit Rec 2.
The following screenshot presents page 2 in advanced mode of the Protocol tab in the
server-based application and highlights the Channel settings area.
EE
Description Activates the E2E or live mode (the signal being recorded is
played on the output channel).
Values Yes / No
Default Value Yes
Stop Behavior
Description Defines the channel behavior when it is in stop mode.
Values • PB, black screen
• EE
Default Value PB
159 3. Multicam Configuration
EVS Broadcast Equipment S.A. - April 2012 Issue 11.00.C