EVS XT3 Version 11.00 Configuration Manual - Manual (Page 22)

2. Click Export next to the configuration line you want to export.
3. In the File Download dialog box, click Save.
4. Select the location where you will save the export configuration file (.lin file) and, if
requested, change the file name.
5. Click Save.
The export file is saved at the requested location.
If you want to export several configuration lines, repeat this operation for all requested
configuration lines.
How to Import Configuration Lines
In the Server-Based Application
Note
In the server-based application, the configuration lines are imported from a USB
key. For this reason, you first need to insert into the EVS server (USB port on
the front panel) the USB key that contains the .lin file to be imported .
Warning
If the EVS server is password-protected, you should deactivate the password
protection. Otherwise, you will only be able to import the operational settings of
the configuration lines selected for import.
1. In the Multicam Setup window, press M to call the Import Configuration Lines
command.
A message informs you that the USB key is being parsed for the detection of folders
containing configuration files (.lin files).
XT3 Server - Version 11.00 - Configuration Manual
2. Multicam Setup 16