Loop recording, Clip capacity – EVS XT3 Version 11.00 Configuration Manual User Manual
Page 89
The following screenshot presents page 7 of the Channels tab, where the Recorder
settings are available in the server-based application, and highlights the Channel and
Control settings area:
Loop Recording
Description
Enables/disables the endless loop recording of all record
channels of the EVS server.
Values
Yes (default) / No
In LSM configurations, the value is forced to 'Yes'.
Clip Capacity
Description
Recording mode on the recorder channels.
Values
The following values are available: Global / Per channel
•
Global:
In this mode, the clip capacity is shared between the
different record trains.
Example: When 3 record trains are used, creating a clip of
30 min on REC1 will take 10 min of recording capacity
equally from each record train.
•
Per channel:
In this mode, the clip capacity is only relevant to the
individual record train.
Example: When 3 record trains are used, creating a clip of
30 min on REC1 will take 30 min of recording capacity from
the 1
st
record train, but will not affect the recording
capacity of the other two record trains.
Default value
The default value depends on the base configuration:
•
Global (locked):
in LSM configurations
in Video delay configurations
•
Per channel:
with 2-ch VTR
in Slave/Server
configurations
83
3. Multicam Configuration
EVS Broadcast Equipment S.A. - April 2012
Issue 11.00.C