EVS XT3 Version 11.00 Configuration Manual - Manual (Page 81)

Channels and Control Settings
Introduction
The Channel and Control settings mainly allow specifying which controllers (main and
possibly secondary) have the hand on which play or record channels.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Channels tab, in the advanced display mode
on page 1 on the server- and web-based interfaces.
• in the Technical menu of the Remote Control Panel (T2.3 to T2.6).
The following screenshot presents th e page 1 of the Channels tab, where the Channel
and Control settings are available in the server-based application, and highlights the
Channel and Control settings field group:
Name
Description User-defined name for play or record channel. This name will
be used for the OSD, and in the IPDirector application suite.
The name can contain maximum 24 characters.
75 3. Multicam Configuration
EVS Broadcast Equipment S.A. - April 2012 Issue 11.00.C