EVS XT3 Version 11.00 Configuration Manual - Manual (Page 219)

Warning
The hypermotion feature and settings are only available if the license code 20,
which allows controlling a hypermotion camera from the remote panel, is valid.
The following screenshot presents page 5 of the Operation tab in the server-based
application, where the Hypermotion controller settings are available, and highlights the
Hypermotion controller settings area:
Hypermotion
Description Enables or disables the hypermotion camera control feature.
When this setting is enabled, you can access and use the
hypermotion menu on the LSM Remote Panel via the
SHIFT+D key combination in the operational menu.
Values Yes / No
Default Values No
Recorder
Description Selects the recorder channel to which the A/V material from
the hypermotion camera will be sent.
Values CAM A to CAM D
Default Values The default value is the last CAM defined in the channel
configuration (for ex. CAM C in a 3 IN 3 OUT configuration).
213 3. Multicam Configuration
EVS Broadcast Equipment S.A. - April 2012 Issue 11.00.C