EVS XT3 Version 11.00 Configuration Manual - Manual (Page 49)

Display Mode
The settings in the Multicam Configuration window have been categorized as basic or
advanced settings depending on whether they are commonly used or not.
Two display modes are consequently available:
• Basic mode
• Advanced mode
Selecting the basic mode will hide settings on some pages, or completely hide other
pages.
To change the display mode in the server-based application, press F3.
To change the display mode in the web-based interface, click on the display mode label
or .
User Interfaces
Server-Based User Interface
The following screenshot presents the 1st tab, and 1st page of the Multicam Configuration
window in the server-based application, shown in advanced mode:
• The title bar displays the selected configuration, and specifies whether the
configuration has been launched (running) or not (not running).
• The selected tab is highlighted in pink.
• The current page and number of pages in the tab are specified in the top right corner.
• The Display mode (basic or advanced) is specified in the top right corner.
43 3. Multicam Configuration
EVS Broadcast Equipment S.A. - April 2012 Issue 11.00.C