EVS XT3 Version 11.00 Configuration Manual - Manual (Page 210)

3.8.11. EVS Controller Settings
Introduction
The EVS Controller settings gather all settings related to the behavior of the keys, lever or
jog of the LSM Remote Panel.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Operation tab, in the basic display mode:
◦
on page 4 on the server-based application.
◦ on page 1 on the web-based interface.
• in the Operational setup menu of the Remote Control Panel (9.1 to 9.3).
The following screenshot presents page 4 of the Operation tab in the server-based
application, where the EVS Controller settings are available:
Effect duration for take
Description Defines the duration of the transition when using the TAKE
key to chain 2 sequences in PGM+PRV mode.
Values Range of values: 00s00fr to 20s00fr.
Default value 00s05fr:
Fast jog
Description Sets the increment of the jump when the LSM Remote Panel
is used in Fast Jog mode.
Values The values from 1 to 20 times are possible.
Default value 20x
XT3 Server - Version 11.00 - Configuration Manual
3. Multicam Configuration 204