EVS XT3 Version 11.00 Configuration Manual - Manual (Page 139)

CleanVBI
Description Specifies whether the VBI (Vertical Blanking Interface)
information needs to be cleaned on the output.
The VITC being recorded in the active video lines, it can be
disrupted in play var because of interpolation or parity violation
on some fields. Moreover, if the server inserts VITC on the
output while there is already VITC on another line, it can
create problems.
Values
• No (default) The VBI is not cleaned in the output.
• Always The VBI is always cleaned in the output.
• If not OK The VBI is cleaned in the output if it is not
correct (play var mode, vertical split screen,
etc).
SMPTE Package Settings
Introduction
The SMPTE Package Management settings specify how ancillary data packets stored in
the vertical ancillary data space in HD and SD signals are handled.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Channels tab, in the advanced display mode:
◦
on page 6, 7 or 8 on the server-based application.
◦ on page 1 on the web-based interface.
• partly in the Technical menu of the Remote Control Panel (T2.13).
The following screenshot presents page 8 of the Channels tab in the server-based
application, where the SMPTE Package settings are available, and highlights the SMPTE
Package settings area:
133 3. Multicam Configuration
EVS Broadcast Equipment S.A. - April 2012 Issue 11.00.C