EVS XT3 Version 11.00 Configuration Manual - Manual (Page 8)

• a configuration section for each configuration line. It is presented in seven tabs which
easily give access to all configuration parameters:
Simplification of the User Interface
The user interface has been simplified thanks to:
• the separation of basic and advanced parameters
The most commonly used parameters are displayed in a basic mode while more
specific parameters are hidden, and can be displayed when you toggle to the
advanced mode.
• the filtering of the parameters displayed
The parameters are only displayed when they are applicable to the chassis type, the
video standard and option codes.
Parameter Changes While Server is Running
Changes to most parameters can now be performed and will be taken into account while
the server is running.
Clarification of Audio Configurations
The audio configurations are more open and more easily configurable as it is now possible
to:
• modify the audio parameters while the server is running
• configure individual outputs for Embedded, Digital and Analog audio.
• configure audio monitoring settings directly from the Remote Control panel.
Configuration Available from Server, Web and Remote
Panel
You can configure the EVS server using one of the three available tools:
• The server-based application (VGA) features all settings and commands for the setup
and configuration.
• The newly designed web-based interface is equivalent to the server-based application
and enables engineers to configure the EVS server remotely.
2 1. Introduction
EVS Broadcast Equipment S.A. - April 2012 Issue 11.00.C