SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 97)

C
ONFIGURING
SNMP
3-47
Enabling SNMP
Enables SNMPv3 service for all management clients (i.e., versions 1, 2c, 3).
Command Attributes
SNMP Agent Status – Enables SNMP on the switch.
Web – Select SNMP, Agent Status.
Figure 3-21 Enabling the SNMP Agent
CLI – The following example enables SNMP on the switch.
Setting Community Access Strings
You may configure up to five community strings authorized for
management access using SNMP v1 and v2c. All community strings used
for IP Trap Managers should be listed in this table. For security reasons,
you should consider removing the default strings.
Command Attributes
• SNMP Community Capability – Indicates that the switch supports
up to five community strings.
• Current – Displays a list of the community strings currently
configured.
Console(config)#snmp-server 4-164
Console(config)#