SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 418)

C
OMMAND
L
INE
I
NTERFACE
4-156
show access-group
This command shows the port assignments of ACLs.
Command Mode
Privileged Executive
Example
SNMP Commands
Controls access to this switch from management stations using the Simple
Network Management Protocol (SNMP), as well as the error types sent to
trap managers.
SNMPv3 provides security features that cover message integrity,
authentication, and encryption; as well as controlling user access to specific
areas of the MIB tree. To use SNMPv3, first set an engine ID (or accept the
default), specify read and write access views for the MIB tree, configure
SNMP user groups with the required security model (i.e., SNMP v1, v2c or
v3) and security level (i.e., authentication and privacy), and then assign
SNMP users to these groups, along with their specific authentication and
privacy passwords.
Console#show access-group
Interface ethernet 1/2
IP standard access-list david
MAC access-list jerry
Console#