SMC Networks SMC TigerStack III SMC6824MPE User Manual
Page 50
I
NITIAL
C
ONFIGURATION
2-14
A maximum PoE power budget for the switch (power available to all
switch ports) can be defined so that power can be centrally managed,
preventing overload conditions at the power source. If the power demand
from devices connected to the switch exceeds the power budget setting,
the switch uses port power priority settings to limit the supplied power.
In the example below, the power mainpower maximum allocation CLI
command is used to set the PoE power budget for the switch.
(Range: 37 - 375 watts). If devices connected to the switch require more
power than the switch budget, the port power priority settings are used to
control the supplied power.
See “Setting a Switch Power Budget” on page
PoE is enabled for all ports by default. Power can be disabled for a port by
using the no form of the power inline CLI command, as shown in the
example below.
Console(config)#power mainpower maximum allocation 200
Console(config)#interface ethernet 1/2
4-131
Console(config-if)#no power inline
4-70
Console(config-if)#