SMC Networks Edge-core ES4710BD - Manual

SWITCHING ES4710BD
Edge-core™ Chassis Core Routing Switch
The SMC Edge-Core ES4710BD is a high performance, 10-slot, Layer 3 chassis
switch which supports IPv4/IPv6. It can operate with single or dual manage-
ment modules. The Slots can be any combination of network interface mod-
ules and 1 or 2 management modules. With redundant power supplies, fans,
and management modules, the SMC Edge-Core ES4710BD ensures continuous
operation and is a fully redundant system. All parts of the system are hotswap-
pable meaning that all components can be added or exchanged without inter- rupting the whole system. The ES4710BD is ideal for the core of a campus,
enterprise networks or for the aggregation layer of an IP metropolitan net-
works.
OVERVIEW
FEATURES BENEFITS
The SMC EdgeCore ES4710BD supports high port density perfor-
mance. Supports up to 32 10G ports or 384 Gigabit ports, providing fl exibility and high
port density.
Up to 4 10G Ports per module 10G modules support up to 4 ports for link to L3 Gigabit switches or L2 Gigabit
switches, aggregating them to the core layer, and preventing bottlenecks in Gigabit
switches
Full Layer 3 support Supports RIP, OSPF and BGP4+ for Unicast routing and DVMRP and PIM-DM/SM
for multicast routing. VRRP is included for added redundancy
IPv6 Routing Support The SMC EdgeCore ES4710BD supports IPv6 routing in hardware for maximum
performance
www.smc.com