SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 371)

A
UTHENTICATION
C
OMMANDS
4-109
Example
show tacacs-server
This command displays the current settings for the TACACS+ server.
Default Setting
None
Command Mode
Privileged Exec
Example
Port Security Commands
These commands can be used to disable the learning function or manually
specify secure addresses for a port. You may want to leave port security off
for an initial training period (i.e., enable the learning function) to register all
the current VLAN members on the selected port, and then enable port
security to ensure that the port will drop any incoming frames with a source
MAC address that is unknown or has been previously learned from another
port.
Console(config)#tacacs-server key green
Console(config)#
Console#show tacacs-server
Remote TACACS server configuration:
Server IP address: 10.11.12.13
Communication key with radius server: green
Server port number: 49
Console#
Table 4-31 Port Security Commands
Command Function Mode Page
port security Configures a secure port IC 4-110
mac-address-table static Maps a static address to a port in a VLAN GC 4-206
show mac-address-table Displays entries in the bridge-forwarding
database
PE 4-208