SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 354)

C
OMMAND
L
INE
I
NTERFACE
4-92
Power over Ethernet Commands
The commands in this group control the power that can be delivered to
attached PoE devices through the switch ports.
The switch’s power management enables total switch power and individual
port power to be controlled within a configured power budget. Port power
can be automatically turned on and off for connected devices, and a per-port
power priority can be set so that the switch never exceeds its allocated power
budget. When a device is connected to a switch port, its power requirements
are detected by the switch before power is supplied. If the power required by
a device exceeds the power budget of the port or the whole switch, power is
not supplied.
Table 4-26 PoE Commands
Command Group Function Mode Page
power mainpower
maximum allocation Sets the maximum power available to all
switch ports GC 4-93
power inline Turns power on and off for specific ports IC 4-94
power inline
maximum allocation Sets the maximum power available to specific
switch ports IC 4-95
power inline priority Sets the priority for power supplied to specific
ports
IC 4-95
show power inline
status Displays the current status of power
management on specific ports or all ports PE 4-96
show power
mainpower Displays the current status of power
management for switch PE 4-97