SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 433)

SNMP C
OMMANDS
4-171
snmp-server user
Use this command to add a user to an SNMP group, restricting the user to a
specific SNMP Read and a Write View. Use the no form to remove a user
from an SNMP group.
Syntax
snmp-server user username groupname {v1 | v2c | v3 [encrypted]
[auth {md5 | sha} auth-password [priv des56 priv-password]]
no snmp-server user username
• username - Name of user connecting to the SNMP agent. (Range: 1-32
characters)
• groupname - Name of an SNMP group to which the user is assigned.
(Range: 1-32 characters)
• v1 | v2c | v3 - Use SNMP version 1, 2c or 3.
• encrypted - Accepts the password as encrypted input.
• auth - Uses SNMPv3 with authentication.
• md5 | sha - Uses MD5 or SHA authentication.
• auth-password - Authentication password. Enter as plain text if the
encrypted option is not used. Otherwise, enter an encrypted
password. (A minimum of eight characters is required.)
• priv des56 - Uses SNMPv3 with 56-bit DES data encryption.
• priv-password - Privacy password. Enter as plain text if the encrypted
option is not used. Otherwise, enter an encrypted password.
Table 4-42 SNMP Group
Field Description
groupname Name of an SNMP group.
security model The SNMP version.
readview The associated read view.
writeview The associated write view.
notifyview The associated notify view.
storage-type The storage type for this entry.
Row Status The row status of this entry.