Stopbits, Disconnect, Stopbits -25 – SMC Networks SMC TigerStack III SMC6824MPE User Manual

Page 287: Disconnect -25

INE

OMMANDS

4-25

stopbits

Use this command to set the number of the stop bits transmitted per byte.
Use the no form to restore the default setting.

Syntax

stopbits {1 | 2}

• 1 - One stop bit
• 2 - Two stop bits

Default Setting

1 stop bit

Command Mode

Line Configuration

Example

To specify 2 stop bits, enter this command:

disconnect

This command terminates an SSH, Telnet, or console connection.

Syntax

disconnect session-id

session-id – The session identifier for an SSH, Telnet or console
connection. (Range: 0-4)

Command Mode

Privileged Exec

Console(config-line)#stopbits 2
Console(config-line)#