SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 359)

P
OWER OVER
E
THERNET
C
OMMANDS
4-97
Command Mode
Privileged Exec
Command Usage
This command displays the following parameters:
Example
show power mainpower
Use this command to display the current power status for the switch.
Command Mode
Privileged Exec
show power inline status parameters
Parameter
Description
Admin The power mode set on the port (see power inline 4-94)
Oper The current operating power status (displays on or off)
Power (mWatt) Displays a list of files in flash memory
Power (used) The current power consumption on the port in milliwatts
Priority The port’s power priority setting
(see power inline priority 4-95)
Console#show power inline status
Interface Admin Oper Power(mWatt) Power(used) Priority
---------- ------- ---- ------------ ------------ --------
Eth 1/ 1 enable off 15400 0 low
Eth 1/ 2 enable off 15400 0 low
Eth 1/ 3 enable on 15400 7505 low
Eth 1/ 4 enable off 15400 0 low
Eth 1/ 5 enable off 15400 0 low
Eth 1/ 6 enable off 15400 0 low
Eth 1/ 7 enable on 15400 8597 low
.
.
.
Eth 1/23 enable off 15400 0 low
Eth 1/24 enable off 15400 0 low
Console#