Mac-address-table aging-time, Mac-address-table aging-time -209 – SMC Networks SMC TigerStack III SMC6824MPE User Manual
Page 471
![background image](/manuals/147287/471/background.png)
A
DDRESS
T
ABLE
C
OMMANDS
4-209
• The mask should be hexadecimal numbers (representing an equivalent
bit mask) in the form xx-xx-xx-xx-xx-xx that is applied to the specified
MAC address. Enter hexadecimal numbers, where an equivalent binary
bit “0” means to match a bit and “1” means to ignore a bit. For example,
a mask of 00-00-00-00-00-00 means an exact match, and a mask of
FF-FF-FF-FF-FF-FF means “any.”
• The maximum number of address entries is 8191.
Example
mac-address-table aging-time
Use this command to set the aging time for entries in the address table. Use
the no form to restore the default aging time.
Syntax
mac-address-table aging-time seconds
no mac-address-table aging-time
seconds - Time in number of seconds (10-1000000, or 0 to disable).
Default Setting
300 seconds
Command Mode
Global Configuration
Command Usage
The aging time is used to age out dynamically learned forwarding
information.
Example
Console#show mac-address-table
Interface Mac Address Vlan Type
--------- ----------------- ---- -----------------
Eth 1/ 1 00-E0-29-94-34-DE 1 Delete-on-reset
Console#
Console(config)#mac-address-table aging-time 300
Console(config)#