SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 415)

A
CCESS
C
ONTROL
L
IST
C
OMMANDS
4-153
Command Usage
• You must configure an ACL mask before you can map CoS values to the
rule.
• A packet matching a rule within the specified ACL is mapped to one of
the output queues as shown below.
Example
Related Commands
queue cos-map (4-248)
show map access-list mac (4-153)
show map access-list mac
This command shows the CoS value mapped to a MAC ACL for the current
interface. (The CoS value determines the output queue for packets matching
an ACL rule.)
Syntax
show map access-list mac [interface]
interface
ethernet unit/port
- unit - This is device 1.
- port - Port number.
Command Mode
Privileged Exec
Table 4-37 Mapping CoS Values to MAC ACL Rules
Queue 0 1 2 3
Priority 1,2 3 4,5 6,7
Console(config)#int eth 1/5
Console(config-if)#map access-list mac M5 cos 0
Console(config-if)#