SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 414)

C
OMMAND
L
INE
I
NTERFACE
4-152
show mac access-group
This command shows the ports assigned to MAC ACLs.
Command Mode
Privileged Exec
Example
Related Commands
mac access-group (4-151)
map access-list mac
This command sets the output queue for packets matching an ACL rule. The
specified CoS value is only used to map the matching packet to an output
queue; it is not written to the packet itself. Use the no form to remove the
CoS mapping.
Syntax
[no] map access-list mac acl_name cos cos-value
• acl_name – Name of the ACL. (Maximum length: 16 characters)
• cos-value – CoS value. (Range: 0-7)
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Console#show mac access-group
Interface ethernet 1/5
MAC access-list M5 out
Console#