SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 506)

C
OMMAND
L
INE
I
NTERFACE
4-244
Example
Related Commands
garp timer (4-242)
Priority Commands
The commands described in this section allow you to specify which data
packets have greater precedence when traffic is buffered in the switch due to
congestion. This switch supports CoS with four priority queues for each
port. Data packets in a port’s high-priority queue will be transmitted before
those in the lower-priority queues. You can set the default priority for each
interface, the relative weight of each queue, and the mapping of frame
priority tags to the switch’s priority queues.
Console#show garp timer ethernet 1/1
Eth 1/ 1 GARP timer status:
Join timer: 20 centiseconds
Leave timer: 60 centiseconds
Leaveall timer: 1000 centiseconds
Console#
Table 4-59 Priority Commands
Command Groups Function Page
Priority (Layer 2) Configures default priority for untagged frames,
sets queue weights, and maps class of service tags to
hardware queues 4-245
Priority (Layer 3 and 4) Maps TCP ports, IP precedence tags, or IP DSCP
tags to class of service values
4-251