SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 133)

U
SER
A
UTHENTICATION
3-83
CLI – This example sets the 802.1x parameters on port 2. For a
description of the additional fields displayed in this example, see “show
dot1x” on page 4-119
Console(config)#interface ethernet 1/2 4-174
Console(config-if)#dot1x port-control auto 4-114
Console(config-if)#dot1x re-authentication 4-116
Console(config-if)#dot1x max-req 5 4-114
Console(config-if)#dot1x timeout quiet-period 40 4-117
Console(config-if)#dot1x timeout re-authperiod 5 4-117
Console(config-if)#dot1x timeout tx-period 40 4-118
Console(config-if)#exit
Console(config)#exit
Console#show dot1x
4-119
Global 802.1X Parameters
system-auth-control: enable
802.1X Port Summary
Port Name Status Operation Mode Mode
Authorized
1/1 disabled Single-Host ForceAuthorized yes
1/2 enabled Single-Host Auto n/a
.
.
1/25 disabled Single-Host ForceAuthorized n/a
1/26 disabled Single-Host ForceAuthorized n/a
802.1X Port Details
802.1X is disabled on port 1/1
802.1X is enabled on port 1/2
reauth-enabled: Disable
reauth-period: 3600
quiet-period: 60
tx-period: 30
supplicant-timeout: 30
server-timeout: 50
reauth-max: 2
max-req: 2
Status Unauthorized
Operation mode Single-Host
Max count 5
Port-control Auto
Supplicant 00-00-00-00-00-00
Current Identifier 0
Authenticator State Machine
State Initialize
Reauth Count 0
Backend State Machine
State Initialize
Request Count 0
Identifier(Server) 0
Reauthentication State Machine
State Initialize
.
802.1X is disabled on port 1/26
Console#