SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 387)

A
CCESS
C
ONTROL
L
IST
C
OMMANDS
4-125
IP ACLs
Table 4-34 IP ACL Commands
Command Function Mode Page
access-list ip Creates an IP ACL and enters
configuration mode GC 4-126
permit, deny Filters packets matching a specified
source IP address STD-A
CL 4-127
permit, deny Filters packets meeting the specified
criteria, including source and destination
IP address, TCP/UDP port number,
protocol type, and TCP control code EXT-A
CL 4-128
show ip access-list Displays the rules for configured IP
ACLs PE 4-131
access-list ip
mask-precedence Changes to the mode for configuring
access control masks GC 4-131
mask Sets a precedence mask for the ACL
rules IP-Mask 4-132
show access-list ip
mask-precedence Shows the ingress or egress rule masks
for IP ACLs PE 4-136
ip access-group Adds a port to an IP ACL IC 4-137
show ip access-group Shows port assignments for IP ACLs PE 4-137
map access-list ip Sets the CoS value and corresponding
output queue for packets matching an
ACL rule IC 4-138
show map access-list ip Shows CoS value mapped to an access
list for an interface
PE 4-140
match access-list ip Changes the 802.1p priority, IP
Precedence, or DSCP Priority of a frame
matching the defined rule (also called
packet marking) IC 4-141
show marking Displays the current configuration for
packet marking PE 4-142