SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 327)

S
YSTEM
M
ANAGEMENT
C
OMMANDS
4-65
The following example displays settings for the trap function.
Table 4-19 Show Logging Parameters
Field Description
Syslog logging Shows if system logging has been enabled via the logging on
command.
History logging in
FLASH The message level(s) reported based on the logging history
command.
History logging in
RAM The message level(s) reported based on the logging history
command.
Messages Any system and event messages stored in memory.
Console#show logging trap
Syslog logging: Enabled
REMOTELOG status: Enabled
REMOTELOG facility type: local use 7
REMOTELOG level type: Informational messages only
REMOTELOG server IP address: 192.168.1.6
REMOTELOG server IP address: 192.168.1.7
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
Console#
Table 4-20 Remote Logging
Field Description
Syslog logging Shows if system logging has been enabled via the logging on
command.
REMOTELOG
status Shows if remote logging has been enabled via the logging trap
command.
REMOTELOG
facility type The facility type for remote logging of syslog messages as
specified in the logging facility command.
REMOTELOG
level type The severity threshold for syslog messages sent to a remote
server as specified in the logging trap command.
REMOTELOG
server IP address The address of syslog servers as specified in the logging host
command.