SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 322)

C
OMMAND
L
INE
I
NTERFACE
4-60
Related Commands
logging history (4-60)
clear logging (4-63)
logging history
Use this command to limit syslog messages saved to switch memory based
on severity. The no form returns the logging of syslog messages to the
default level.
Syntax
logging history {flash | ram} level
no logging history {flash | ram}
• flash - Event history stored in flash memory (i.e., permanent
memory).
• ram - Event history stored in temporary RAM (i.e., memory flushed
on power reset).
• level - One of the syslog severity levels listed in the following table.
Messages sent include the selected level down to level 0.
Table 4-18 Logging Levels
Level Severity Name Description
7 Debug Debugging messages
6 Informational Informational messages only
5 Notice Normal but significant condition, such as
cold start
4 Warning Warning conditions (e.g., return false,
unexpected return)
3 Error Error conditions (e.g., invalid input,
default used)
2 Critical Critical conditions (e.g., memory
allocation, or free memory error - resource
exhausted)
1 Alert Immediate action needed
0 Emergency System unusable
* There are only Level 2, 5 and 6 error messages for the current firmware release.