Setting the time zone, Setting the time zone -43, Figure 3-19 configuring sntp -43 – SMC Networks SMC TigerStack III SMC6824MPE User Manual
Page 93: Command attributes
B
ASIC
C
ONFIGURATION
3-43
Web – Select SNTP, Configuration. Modify any of the required parameters
and click Apply.
Figure 3-19 Configuring SNTP
CLI – This example configures the switch to operate as an SNTP unicast
client and then displays the current time and settings.
Setting the Time Zone
SNTP uses Coordinated Universal Time (or UTC, formerly Greenwich
Mean Time, or GMT) based on the time at the Earth’s prime meridian,
zero degrees longitude. To display a time corresponding to your local time,
you must indicate the number of hours and minutes your time zone is east
(after) or west (before) of UTC.
Command Attributes
•
Current Time – Displays the current time.
•
Name – Assigns a name to the time zone. (Range: 1-29 characters)
Console(config)#sntp server 10.1.0.19 137.82.140.80
128.250.36.2
Console(config)#sntp poll 60
Console(config)#sntp client
Console(config)#exit
Console#show sntp
Current time: Jan 6 14:56:05 2004
Poll interval: 60
Current mode: unicast
SNTP status : Enabled
SNTP server 10.1.0.11 137.82.140.80 128.250.36.2
Current server: 128.250.36.2
Console#