SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 449)

M
IRROR
P
ORT
C
OMMANDS
4-187
Mirror Port Commands
This section describes how to mirror traffic from a source port to a target
port.
Table 4-45 Show Interfaces Switchport Output - Description
Field Description
Broadcast threshold Shows if broadcast storm suppression is enabled or disabled;
if enabled it also shows the threshold level (See page 4-181.)
Lacp status Shows if Link Aggregation Control Protocol has been enabled
or disabled (See page 4-195.)
VLAN membership
mode Indicates membership mode as Trunk or Hybrid
(See page 4-231.)
Ingress rule Shows if ingress filtering is enabled or disabled
(See page 4-233.)
Acceptable frame type Shows if acceptable VLAN frames include all types or tagged
frames only (See page 4-232.)
Native VLAN Indicates the default Port VLAN ID (See page 4-234.)
Priority for untagged
traffic Indicates the default priority for untagged frames
(See page 4-244.)
Gvrp status Shows if GARP VLAN Registration Protocol is enabled or
disabled (See page 4-241.)
Allowed Vlan Shows the VLANs this interface has joined, where “(u)”
indicates untagged and “(t)” indicates tagged
(See page 4-235.)
Forbidden Vlan Shows the VLANs this interface can not dynamically join via
GVRP (See page 4-236.)
Table 4-46 Mirror Port Commands
Command Function Mode Page
port monitor Configures a mirror session IC 4-188
show port monitor Shows the configuration for a mirror port PE 4-189