SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 525)

M
ULTICAST
F
ILTERING
C
OMMANDS
4-263
Default Setting
IGMP Version 2
Command Mode
Global Configuration
Command Usage
• All systems on the subnet must support the same version. If there are
legacy devices in your network that only support Version 1, you will also
have to configure this switch to use Version 1.
• Some commands are only enabled for IGMPv2, including ip igmp
query-max-response-time and ip igmp query-timeout.
Example
The following configures the switch to use IGMP Version 1:
show ip igmp snooping
Use this command to show the IGMP snooping configuration.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
See “Layer 2 IGMP (Snooping and Query)” on page 3-199 for a
description of the displayed items.
Console(config)#ip igmp snooping version 1
Console(config)#