SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 435)

I
NTERFACE
C
OMMANDS
4-173
Interface Commands
These commands are used to display or set communication parameters for
an Ethernet port, aggregated link, or VLAN.
Table 4-43 SNMP User
Field Description
EngineId String identifying the engine ID.
User Name Name of user connecting to the SNMP agent.
Authentication
Protocol The authentication protocol used with SNMPv3.
Privacy Protocol The privacy protocol used with SNMPv3.
Storage Type The storage type for this entry.
Row Status The row status of this entry.
Table 4-44 Interface Commands
Command Function Mode Page
interface Configures an interface type and enters interface
configuration mode GC 4-174
description Adds a description to an interface configuration IC 4-175
speed-duplex Configures the speed and duplex operation of a
given interface when autonegotiation is disabled IC 4-175
negotiation Enables autonegotiation of a given interface IC 4-177
capabilities Advertises the capabilities of a given interface for
use in autonegotiation IC 4-178
flowcontrol Enables flow control on a given interface IC 4-179
shutdown Disables an interface IC 4-180
switchport
broadcast
packet-rate Configures broadcast storm control IC 4-181
clear counters Clears the statistics on a given interface PE 4-182
show interfaces
status Displays status for the specified interface NE,
PE 4-183