Show users, Show users -81 – SMC Networks SMC TigerStack III SMC6824MPE User Manual
Page 343
S
YSTEM
M
ANAGEMENT
C
OMMANDS
4-81
Command Mode
Normal Exec, Privileged Exec
Command Usage
• For a description of the items shown by this command, refer to
“Displaying System Information” on page 3-11.
• The POST results should all display “PASS.” If any POST test indicates
“FAIL,” contact your distributor for assistance.
Example
show users
Shows all active console and Telnet sessions, including user name, idle time,
and IP address of Telnet client.
Default Setting
None
Console#show system
System description: Intelligent Fast Ethernet PoE Switch; SW version:
V2.3.3.5
System OID string: 1.3.6.1.4.1.259.6.10.56
System information
System Up time: 0 days, 1 hours, 34 minutes, and 7.77
seconds
System Name: Intelligent Fast Ethernet PoE Switch
System Location: TPS 1st Floor
System Contact: Geoff
MAC address: 00-30-F1-B3-16-C0
Web server: enabled
Web server port: 80
Web secure server: enabled
Web secure server port: 443
Telnet server : enable
Telnet server port : 23
POST result
DUMMY Test 1.................PASS
UART LOOP BACK Test..........PASS
DRAM Test....................PASS
Timer Test...................PASS
PCI Device Test..............PASS
Switch Int Loopback test.....PASS
Done All Pass
Console#