SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 468)

C
OMMAND
L
INE
I
NTERFACE
4-206
Address Table Commands
These commands are used to configure the address table for filtering
specified addresses, displaying current entries, clearing the table, or setting
the aging time.
mac-address-table static
Use this command to map a static address to a destination port in a VLAN.
Use the no form to remove an address.
Syntax
mac-address-table static mac-address interface interface vlan vlan-id
[action]
no mac-address-table static mac-address vlan vlan-id
• mac-address - MAC address.
• interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-4)
• vlan-id - VLAN ID (Range: 1-4094)
Table 4-52 Address Table Commands
Command Function Mode Page
mac-address-table static Maps a static address to a port in a
VLAN GC 4-206
clear mac-address-table
dynamic Removes any learned entries from the
forwarding database PE 4-207
show mac-address-table Displays entries in the
bridge-forwarding database PE 4-208
mac-address-table
aging-time Sets the aging time of the address table GC 4-207
show mac-address-table
aging-time Shows the aging time for the address
table PE 4-210