SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 274)

C
OMMAND
L
INE
I
NTERFACE
4-12
Command Groups
The system commands can be broken down into the functional groups
shown below
.
Table 4-4 Command Group Index
Command Group Description Page
Line Sets communication parameters for the serial port
and Telnet, including baud rate and console time-out 4-15
General Basic commands for entering privileged access
mode, restarting the system, or quitting the CLI 4-27
System Management Controls system logs, system passwords, user name,
browser management options, and a variety of other
system information
4-34
Flash/File Manages code image or switch configuration files 4-83
Power over Ethernet Configures power output for connect devices 4-92
Authentication Configures RADIUS and TACACS+ client-server
authentication for logon access and commands for
IEEE 802.1x port access control. 4-99
Access Control Lists Provides filtering for IP frames (based on address,
protocol, TCP/UDP port number or TCP control
code) or non-IP frames (based on MAC address or
Ethernet type) 4-122
SNMP Activates authentication failure traps; configures
community access strings, and trap managers; also
configures IP address filtering
4-156
Interface Configures the connection parameters for all
Ethernet ports, aggregated links, and VLANs 4-173
Mirror Port Mirrors data to another port for analysis without
affecting the data passing through or the
performance of the monitored port 4-187
Rate Limiting Controls the maximum rate for traffic transmitted or
received on a port 4-190
Link Aggregation Statically groups multiple ports into a single logical
trunk; configures Link Aggregation Control Protocol
for port trunks 4-192