SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 256)

C
ONFIGURING THE
S
WITCH
3-206
Web – Click IGMP, IGMP Member Port Table. Specify the interface
attached to a multicast service (via an IGMP-enabled switch or multicast
router), indicate the VLAN that will propagate the multicast service,
specify the multicast IP address, and then click Add. After you have
completed adding ports to the member list, click Apply.
Figure 3-94 IGMP Member Port Table
CLI – This example assigns a multicast address to VLAN 1, and then
displays all the known multicast services supported on VLAN 1.
Configuring Domain Name Service
The Domain Naming System (DNS) service on this switch allows host
names to be mapped to IP addresses using static table entries or by
redirection to other name servers on the network. When a client device
designates this switch as a DNS server, the client will attempt to resolve
host names into IP addresses by forwarding DNS queries to the switch,
and waiting for a response.
Console(config)#ip igmp snooping vlan 1 static 224.0.0.12
ethernet 1/12 4-262
Console(config)#exit
Console#show mac-address-table multicast vlan 1
4-264
VLAN M'cast IP addr. Member ports Type
---- --------------- ------------ -------
1 224.0.0.12 Eth1/12 USER
1 224.1.2.3 Eth1/12 IGMP
Console#