SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 313)

S
YSTEM
M
ANAGEMENT
C
OMMANDS
4-51
ip ssh timeout
Use this command to configure the timeout for the SSH server. Use the no
form to restore the default setting.
Syntax
ip ssh timeout seconds
no ip ssh timeout
seconds – The timeout for client response during SSH negotiation.
(Range: 1-120)
Default Setting
10 seconds
Command Mode
Global Configuration
Command Usage
The timeout specifies the interval the switch will wait for a response
from the client during the SSH negotiation phase. Once an SSH session
has been established, the timeout for user input is controlled by the
exec-timeout command for vty sessions.
Example
Related Commands
exec-timeout (4-19)
show ip ssh (4-56)
Console(config)#ip ssh timeout 60
Console(config)#