SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 167)

P
ORT
C
ONFIGURATION
3-117
CLI – The following example configures LACP parameters for ports 1-6.
Ports 1-4 are used as active members of the LAG; ports 5 and 6 are set to
backup mode.
Console(config)#interface ethernet 1/1 4-174
Console(config-if)#lacp actor system-priority 3 4-197
Console(config-if)#lacp actor admin-key 120 4-197
Console(config-if)#lacp actor port-priority 128 4-197
Console(config-if)#exit
.
.
.
Console(config)#interface ethernet 1/6
Console(config-if)#lacp actor system-priority 3
Console(config-if)#lacp actor admin-key 120
Console(config-if)#lacp actor port-priority 512
Console(config-if)#end
Console#sh lacp sysid
4-201
Channel Group System Priority System MAC Address
-------------------------------------------------------------------
1 32768 00-00-E9-31-31-31
2 32768 00-00-E9-31-31-31
3 32768 00-00-E9-31-31-31
4 32768 00-00-E9-31-31-31
5 32768 00-00-E9-31-31-31
6 32768 00-00-E9-31-31-31
Console#show lacp 1 internal
4-201
Channel group : 1
-------------------------------------------------------------------
Oper Key : 120
Admin Key : 120
Console#