SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 159)

P
ORT
C
ONFIGURATION
3-109
Web – Click Port, Port Configuration or Trunk Configuration. Modify the
required interface settings, and click Apply.
Figure 3-48 Port - Port Configuration
CLI – Select the interface, and then enter the required settings.
Creating Trunk Groups
You can create multiple links between devices that work as one virtual,
aggregate link. A port trunk offers a dramatic increase in bandwidth for
network segments where bottlenecks exist, as well as providing a
fault-tolerant link between two devices. You can create up to six trunks at a
time.
Console(config)#interface ethernet 1/13
Console(config-if)#description RD SW#13
4-175
Console(config-if)#shutdown 4-180
.
Console(config-if)#no shutdown
Console(config-if)#no negotiation
4-177
Console(config-if)#speed-duplex 100half 4-175
Console(config-if)#flowcontrol 4-179
.
Console(config-if)#negotiation
Console(config-if)#capabilities 100half
4-178
Console(config-if)#capabilities 100full
Console(config-if)#capabilities flowcontrol