SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 494)

C
OMMAND
L
INE
I
NTERFACE
4-232
Example
The following shows how to set the configuration mode to port 1, and then
set the switchport mode to hybrid.
Related Commands
switchport acceptable-frame-types (4-232)
switchport acceptable-frame-types
Use this command to configure the acceptable frame types for a port. Use
the no form to restore the default.
Syntax
switchport acceptable-frame-types {all | tagged}
no switchport acceptable-frame-types
• all - The port accepts all frames, tagged or untagged.
• tagged - The port only passes tagged frames.
Default Setting
All frame types
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
When set to receive all frame types, any received frames that are untagged are
assigned to the default VLAN.
Console(config)#interface ethernet 1/1
Console(config-if)#switchport mode hybrid
Console(config-if)#