SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 436)

C
OMMAND
L
INE
I
NTERFACE
4-174
interface
Use this command to configure an interface type and enter interface
configuration mode. Use the no form to remove a trunk.
Syntax
interface interface
no interface port-channel channel-id
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-6)
• vlan vlan-id (Range: 1-4094)
Default Setting
None
Command Mode
Global Configuration
Example
To specify port 2, enter the following command:
show interfaces
counters Displays statistics for the specified interfaces NE,
PE 4-184
show interfaces
switchport Displays the administrative and operational status
of an interface NE,
PE 4-186
Console(config)#interface ethernet 1/2
Console(config-if)#
Table 4-44 Interface Commands
Command Function Mode Page