SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 324)

C
OMMAND
L
INE
I
NTERFACE
4-62
logging facility
This command sets the facility type for remote logging of syslog messages.
Use the no form to return the type to the default.
Syntax
[no] logging facility type
type - A number that indicates the facility used by the syslog server to
dispatch log messages to an appropriate service. (Range: 16-23)
Default Setting
23
Command Mode
Global Configuration
Command Usage
The command specifies the facility type tag sent in syslog messages.
(See RFC 3164.) This type has no effect on the kind of messages reported
by the switch. However, it may be used by the syslog server to sort
messages or to store messages in the corresponding database.
Example
logging trap
This command enables the logging of system messages to a remote server
and limits the messages saved based on severity. Use the no form to disable
remote logging.
Syntax
[no] logging trap [level]
level - One of the syslog severity levels. Messages sent include the
selected level up through level 0. (Refer to the table on page 4-60.)
Default Setting
Level 3 - 0
Console(config)#logging facility 19
Console(config)#