SMC Networks SMC TigerStack III SMC6824MPE - Manual (Page 231)

C
LASS OF
S
ERVICE
C
ONFIGURATION
3-181
Web – Click Priority, Traffic Classes. Mark an interface and click Select to
display the current mapping of CoS values to output queues. Assign
priorities to the traffic classes (i.e., output queues) for the selected
interface, then click Apply.
Figure 3-78 Traffic Classes
CLI – The following example shows how to map CoS values 1 and 2 to
CoS priority queue 0, value 0 and 3 to CoS priority queue 1, values 4 and 5
to CoS priority queue 2, and values 6 and 7 to CoS priority queue 3.
* Mapping specific values for CoS priorities is implemented as an interface
configuration command, but any changes will apply to the all interfaces on the switch.
Console(config)#interface ethernet 1/1
Console(config)#queue cos-map 0 1 2
4-248
Console(config)#queue cos-map 1 0 3
Console(config)#queue cos-map 2 4 5
Console(config)#queue cos-map 3 6 7
Console(config)#exit
Console#sh queue cos-map ethernet 1/1
4-250
Information of Eth 1/1
CoS Value : 0 1 2 3 4 5 6 7
Priority Queue: 1 0 0 1 2 2 3 3
Console#